Переключиться на русскую версию

Welcome to Anhui Nabor Mechanical and Electrical Equipment Co., Ltd.

Search

Industrial News &Technological Innovation

Calzoni MRT Motor: Sizing for Very High Torque Drives

The Calzoni MRT is a fixed-displacement radial piston motor for large drive applications that require very high torque. The manufacturer lists 24 displacement options from 7,100 to 53,250 cm³/rev and series torque up to 210,000 Nm. Final sizing must use the operating data for the selected frame and configuration.

What distinguishes the MRT series?

The MRT range covers larger displacement and torque values than the MR family. Calzoni lists five frame sizes and flange or shrink-disk mounting. The series also offers reversible rotation and motor/pump operation, subject to the circuit conditions described in the product information.

ParameterPublished MRT rangeSelection note
Displacement7,100–53,250 cm³/revConfirm exact model and displacement
Standard options24Check available frame/displacement combinations
Frame sizes5Verify dimensions and mounting
Maximum series torqueUp to 210,000 NmUse frame-specific operating diagrams
Temperature range-30 to +80 °CConfirm fluid and ambient limits
MountingFlange or shrink diskMatch the machine interface

The catalogue also lists peak pressure values. Peak pressure should not be treated as a continuous working pressure. Use the operating diagrams and manufacturer guidance to establish permissible pressure and duty for the selected motor.

Where might an MRT motor be used?

Large winches, marine equipment, mining machinery and heavy material-handling systems can require substantial torque at low speed. These applications often have high breakaway loads, intermittent shock loads or long operating cycles. The MRT series may be relevant where the calculated torque and speed fall within its available configurations.

For a winch, the required motor torque depends on line pull, drum radius, rope layers, gearbox ratio and mechanical losses. For a slewing or heavy handling drive, consider inertia, acceleration, holding requirements and external loads. These calculations should be completed before selecting a displacement.

MRT motor sizing: information to prepare

· Continuous, peak and starting torque at the motor shaft.

· Required speed range and available hydraulic flow.

· Normal and peak pressure, including pressure transients.

· Duty cycle, operating hours, starts and reversals.

· Mounting, shaft, gearbox and brake interfaces.

· Fluid type, temperature and environmental conditions.

A motor that meets a short-duration peak torque may not be suitable for continuous operation at that point. Check thermal limits, efficiency, pressure losses and the mechanical load path together.

What about gearboxes, brakes and manifold blocks?

Calzoni lists optional gearboxes, parking brakes and built-on manifold blocks for the MRT range. Depending on the configuration, manifold functions can include cross-relief, anti-cavitation, flushing and drain valves. Shaft, seal, sensor and connection-flange options should also be confirmed.

Do not assume every accessory fits every frame. Confirm availability against the selected MRT code and installation drawing. Where the drive requires load holding, review the brake as a separate safety-related component and verify its torque, speed and release circuit.

Naboer is an authorized Calzoni distributor for China. For a new MRT project, provide the load calculation and installation drawing. For a replacement, send the complete nameplate code and photographs of the motor, gearbox and brake assembly.

FAQ

Is the Calzoni MRT variable displacement?

No. Calzoni lists MRT as a fixed-displacement radial piston motor.

What is the maximum torque listed for MRT?

The manufacturer lists up to 210,000 Nm for the series. The actual permissible torque depends on model and operating conditions.

Can MRT be mounted with a shrink disk?

The official product page lists flange and shrink-disk mounting. Confirm the exact configuration and drawing.

Are brakes and gearboxes available?

Calzoni lists them as options for the MRT range, but compatibility must be confirmed for the selected frame.

Reference Sources

  1. Calzoni MRT series

  2. MRT product information PDF

  3. Calzoni downloads

  4. Naboer authorization announcement

CATEGORIES

CONTACT US

Contact:Sherry Zhou

WhatsApp/Mobile:
+86-189 17398894

E-mail:sherry.z@naboer.com.cn

CONTACT US

Contact:JiaWen Zhou

Phone:+86-199 56011825

E-mail:zjw@naboer.com.cn

Add:Rm706, Building A6 ,Hefei Financial Port, Yangzijiang Road, Baohe District, Hefei City, Anhui Province, China

Copyright © Anhui Nabor Mechanical and Electrical Equipment Co., Ltd. All rights reserved.
Some content on this site is quoted. If there is any infringement, please contact us for removal. Thank you.