FLOAT SWITCH

ABZMS-35-1X/135F100S-T63F-K6

R901096926

Float switch with two switching contacts and one temperature contact

Features

– Float switches are switching devices, which are operated by a float that is moved by a fluid. They are used for the regulation of fluid levels in reservoirs of type ABSKG ... small power

units, sizes 10; 20; 40 and 60, according to data sheet RE 51013.

– Two firmly set reed contacts (normally closed and normally open), which are switched by permanent magnets integrated in the float, are provided in the sliding tubes.

– For monitoring the max. hydraulic fluid temperature, firmly set temperature contacts (option) are installed.

Similar Material Number (SAP):

R901057912, R901057913, R901057914, R901057916, R901057918, R901057920, R901070002, R901070003, R901083495, R901083583, ...

Installation notes

1 Cable

2 Isolating relay

– Vertical installation according to technical data on page 3

– Avoid flows

– Do not expose switches to strong impacts and excessive bending.

– Avoid external magnetic fields. These could impair the function of the reed contacts.

Electrical connections:

– Electrical connections may only be established by specialist personnel

– Tighten circular plug-in connectors M12x1 and female connectors after their connection

– Plug circular plug-in connectors M12x1 and female connectors only when disconnected from the power supply

– Do not overload contacts (see technical data)

– In the case of inductive loads, provide suppressor circuit!